PXX5024AW - Sceptre PXX5024AW Adapter - Overvoltage,overload and short-circuit protection, Application: charger,...
- Part Number:
- PXX5024AW
- Model Number:
- PXX5024AW
- Make:
- SCEPTRE
- Lead Time:
- Available
- Qty In Stock:
- Available
Sceptre PXX5024AW Adapter - Overvoltage,overload and short-circuit protection, Application: charger, power source for instruments, computer peripherals, and consumer electronics, etc Simple Type: Adapter
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- Burn In: The power supply shall withstand a minimum of 4 hours Burn-In test under full
- Component Derating: Semiconductor junction temperatures shall not exceed the manufacturer’s maximum thermal rating
- Dropping (packed): 1 corner, 3 edges, and 3 surfaces (Height: 1m)
- Efficiency: 73.5% minimum at input (115Vac to 230Vac) and rated output Load. International Efficiency Level V
- Hazardous Substances: The components and materials used shall be compliant with EU Directive 2003/95/EC “RoHS
- Hold Up Time: 10 ms minimum at 115Vac/60Hz input at maximum load, and 20 ms minimum at
- Input Current: 500mA rms maximum at the rated inputvoltage range and rated DC output load.
- Input Frequency: Nominal: 50 to 60 Hz., Range: 47 to 63 Hz
- Input Voltage: Nominal: 100 to 240 Vac., Range: 90 to 264 Vac.
- Inrush Current: 50Amps maximum at 100-240Vac input, cold start with rated DC output load
- Operating Temperature: 0 °C to 40 °C, at full load operation
- Output connector specification: Please see our website www.gpelectronics.com
- Output Transient Response: The power supply shall maintain outputtransient response time within 800mV with a loading current change from 20% to 80% of maximum current and 0.5A/µs
- Over-Current Protection: The adaptor must have a current limiting function on the output voltage. In overload mode, the output must drop toa low voltage. OCP is 4.5A MAX.
- Over-Voltage Protection: Over-voltage protection shall be included in the adaptor circuit. A single component failure must not cause an over voltage.
- Relative Humidity: 10% @ 0 °C & 90% @40 °C
- Reliability: When the power supply is operating withinthe limits of this specification,
- Ripple And Noise: Ripple and noise levels are measured at 20MHz bandwidth limit with parallel capacitors (10uF and 0.1uF) connecting across the output of power supply.
- Short-Circuit Protection: The adaptor must withstand a continuousshort circuit on the output without damage.
- Stand By Power: The input power should be less than 0.3W with no load
- Storage Temperature: -10 °C to 60 °C without package
- Turn On Delay: During turn on and turn off, no output voltage shall exceed its nominal voltage by more than 10% and no output shall change its polarity with respect to its return
Applications
- None Available
Aliases
- None Available