PXT2410AW - Sceptre PXT2410AW Adapter - Interchangeable AC inlet prong, O/P: 24VDC...
- Part Number:
- PXT2410AW
- Model Number:
- PXT2410AW
- Make:
- SCEPTRE
- Lead Time:
- Available
- Qty In Stock:
- Available
Sceptre PXT2410AW Adapter - Interchangeable AC inlet prong, O/P: 24VDC (24W) Wall Mount SMPS. Simple Type: Adapter
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 100~240 Vac Universal input
- Application: charger, power source for instruments, computer peripherals, and consumer electronics, etc
- CE Marking
- CEC compliant IV
- EN55022, FCC conducted and radiated emission Level B
- Europe, UK, Australian,and CHINA AC prongs available
- Impact resistant polycarbonate enclosure
- Over-voltage and short-circuit protection
- Patented mechanical safety design
- UL60950/CUL, GS/TUV, C-tick approvals
- Up to 40W continuous output
Specifications
- Altitude: Sea level to 2000 m.
- Altitude: Sea level to 2000 m.
- Burn-In: The power supply shall withstand a minimum of 4 hoursBurn-In test under full load at 35°C ~ 40°C room temperature, after test, product shall operate normally.
- Component De-rating: Semiconductor junction temperatures shall not exceed the manufacturer’s maximum thermal rating.
- Cooling: Natural convection cooling
- Current: The maximum input current is 600mAat 100~240Vac.
- Hold Up Time: 10mSminimum at 115Vac/60Hzinput at maximum load and 20mSminimum at
- Inrush Current: The inrush current will not exceed 50Aat 100~240Vacinput and Max load for a cold start at 25°C.
- MTBF: When the power supply is operating within the limits of this specification the MTBF shall be at least 50,000hours at 25°C (MIL-STD-217F)
- Non – Operating: The power supply shall be capable of withstanding the following environmental conditions extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies.
- Operating: The power supply shall be capable of operating normally in any mode without malfunction happens in the following environmental conditions.
- Operating Temperature: 0°C ~ 40°C
- Output Transient Response: The power supply shall maintain output transient response time within 10mSwith a loading current change from 20% to 80% of maximum current and 0.5A/µS rise up/drown down test at end of output terminal.
- Over-Current Protection: The adaptor must have a current limiting function on the output voltage. In overload mode, the output must drop to a low voltage condition.
- Over-Voltage Protection: Over-voltage protection shall be included in the adaptor circuit. A single component failure must not cause an over voltage mode.
- Relative Humidity: 10% ~ 90%
- Relative Humidity: 10% ~ 90%
- Short-Circuit Protection: The adaptor must withstand a continuous short circuit on the output without damage.
- Stand-By Power: The input power should be less than < with no load.
- Storage Temperature: -30°C ~ 70°C
- Turn on Delay: During turn on and turn off, no output voltage shall exceed its nominal voltage by more than 10%and no output shall change its polarity with respect to its return line. All outputs shall reach their steady state values within 3 secondsof turn on.
- Vibration: 1.0mm, 10 – 55Hz, 15 minutes per cycle for each axis (X,Y,Z).
- Vibration and Shock: The power supply shall be designed to withstand normal transportation vibration per MIL-STD-810Dmethod 514 and procedures X, as it is mounted in the chassis assembly and packed for shipping.
Applications
- None Available
Aliases
- None Available
Related Items
PD-1212ARPR6A
POWER SUPPLY INPUT 120VAC -OUTPUT 12VDC 1.2A- PD-1212ARPR6A
POWER SUPPLY INPUT 120VAC -OUTPUT 12VDC - PD1212ARPR6A
POWER SUPPLY INPUT 120VAC -OUTPUT 12VDC 1.2A 
PS-12100A
Sceptr's PS-12100A Power Supply - a single output +12V/10A DC,