SCEPTRE Industrial Partner

OFUM-50450A - Sceptre OFUM-50450A Power Supply - Power Factor Corrected to EN61000-3-2...

Request Quote
For Price
Part Number:
OFUM-50450A
Model Number:
OFUM-50450A
Make:
SCEPTRE
Lead Time:
Available
Qty In Stock:
Available

Sceptre OFUM-50450A Power Supply - Power Factor Corrected to EN61000-3-2 class D, Providing Peak Power 700W within 500uS duty duration Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 1 U height size and High power density: 6.25 watts/cu inches
  • Current Monitoring and Remote Voltage adjustment (Margin)
  • Medical Safety Approvals
  • Optional N+1 Forced Active Current Sharing
  • Power Factor Corrected to EN61000-3-2 class D
  • Providing Peak Power 700W within 500uS duty duration
  • U-Chassis & Enclosed with built in toll ILAe..lO.Ji..01

Specifications

    General
  • AC Fail (optional): Designated as ACF on the CN3 to monitor the input voltage, when input goes under 80 +'- 5VAC the signal will go low (OV) and then go high (+5V) once reappears over 86VAC.
  • Adjustability: Output user adjustable +?-5°o minimum.
  • Burn In: 45 +'- 5 degree C for I hour @23OVac with full load.
  • Cooling: U-Chassis ©40OW max. with 23CFM airflow or 25OW max. under convection cooling.
  • Current Monitor: Designated as CMN on the CN3 for current sense for a 0 5V to 3VDC to represent 0% to 100% output current.
  • Current sharing: Designated as CSH on the CN3, optional single wired for forced current sharing function and parallel up to 4 units
  • Efficiency: 70% for 3.3V. 75% for 5V, 80% for 12V and 83% minimum for others output @ 230V and full load.
  • Emissions: FCC Part 15, CISPR 22 class B, Conducted.
  • Enclosure: 8 (L) x 5(W) x 1.6(H) inches.
  • Fan Drive: 12VDC'400mA is available to drive an external fan.
  • HI-POT Test:: 1 500 Vac between input line and chassis (2mA DC cut off current): 4000Vac between primary and secondary windings, Primary to core 1500VAC. All for 3 sec.
  • Input Circuit Protection (primary): Two T8A/250V fuses inserted.
  • Input Current: 6.35A at 90VAC full load.
  • Input Voltage: 90-264Vac full range, 47-63Hz.
  • Input Voltage Protection: Power shut down under 80 +/-5Vac, and recovered over 86Vac.
  • Inrush Current: 35A Max @ 230VAC with full load and cold start.
  • Leakage Current: Medical degree 300uA
  • LED display: Bi-color green LED in front panel (RL0402E only), Any protection occurred or RSW applied low signal will emit orange.
  • Margin: Designated as MAG on the CN3 providing 50°/o of output voltage remote adjustment by applying 0 4 - 5V signal on MAG.
  • MTBF: 100000 Hrs (according to MIL-HBK-217F) at 30 C .
  • Operating Humidity: 5% to 90% RH, Non-condensing.
  • Over Temperature Protection: Protected in the event of excessive operating ambient 85 degree, and automatic recovery.
  • Over-Power Protection: C.C. node 110-140% and auto-recovery
  • Over-voltage Protection: Latching down will occur when output voltage exceed 130% and recycle AC input to reset.
  • PFC: Active power factor correction meet EN6 1000-3-2 class D.
  • Power Good: Designated as PG on the CN3 will go high 100-500mS after regulation and goes low 1 mS before loss of regulation.
  • Power Supply On: Green LED designated as LED 1 on the PCB.
  • Remote On-Off: Designated as RSW on the CN3, requires a low signal to inhibit output.
  • Remote sense: Designated RS+ and RS- on the CN3.
  • Safety Regulation: Approved to UL 60601-1. CSA 601.1-M90, TUV 60601-1. CE Mark (LVD) EN61204-3/ 60601-1-2/ 61000-3-2.3 & I EC61000-4 Series Regulations and CB.
  • Short circuit protection: Trip without damage and auto-recovery.
  • Storage Humidity: 5% to 95% RH, Non-condensing.
  • Storage Temperature: -20 to 85 degrees C.
  • Transient response: Returns to within 1% in less than 2.5mS for a 50% load change and the peak transient does not excess 5%.
  • TURN ON DELAY: 1 second maximum at 120 VAC. Hold Up Time: 20mS min_ at 80% of full load.
  • Vibration: Frequency 5 to 50 Hz, acceleration +;-7.35 M/(SxS) on X.Y and Z Axis.
  • Warranty: 2 years.
  • Weight: 1.3KG

 

Applications

  • None Available

Aliases

  • None Available